1/2 HP 115V Genteq X13 Evergreen EM Endura Pro Replacement Module 6105ECTL

Description

6105ECTL , Evergreen Control Module Kit
Evergreen X-13 Direct Replacement Modules...No programming required , can be used to replace ECM Control Modules in Genteq X13 Models , Endura Pro and Evergreen EM Motors Only.  Bi-directional CW and CCW with rotation sensing technology.
For Proper Replacement:  match the horsepower (HP) and voltage (VAC) ratings of the new control to the failed control.  It is not necessary for the RPM or the amperage (FLA) to match.
Evergreen Control Module Kit #
6205ECTL
Product Specifications
1/2 HP
115/60/1 Voltage
Pre-Programmed
No Complex Wiring
2-Year Warranty
Max Current 6.8 Amps
Auto Rotation Sensing CCW/CW
Compatible with OEM Harness / Plugs
Replaces / Supersedes Genteq X13 Modules on 6105 6105EM and other Genteq 1/2 HP 115V Motors as well as Carrier
Factory Authorized Parts
& ICP X13 Genteq Motors
DOES NOT REPLACE Azure Digi-Motor EON , 3.0 , 2.3 and 2.5 ECM Motors
Kit Includes:  (1) EM Control Module , (2) Mounting Bolts , (1) Low Voltage Harness (optional) and Motor ID Labels
This listing is for the MODULE / CONTROLLER ONLY.  Motor Sold Separately & Not Included
Condition:
Brand New , Unused
Quantity
:  (1) Module / Individually Boxed
Tracking to be Provided w/Shipment!
WE SHIP WORLDWIDE!
x
Installation
-
CONTROL MODULE REMOVAL
1.
Disconnect
AC power from the HVAC system.
2
.
Remove wires or plugs connected to the motor control pins (CLGN and 12345).
WARNING!
WAIT 5 MINUTES BEFORE CONTINUING.
3.
Remove the (2) hex-head screws from the back of the motor control.
4.
Gently remove control module from motor to expose the motor harness.
5.
Unplug the 3-pin connector from the inside of the control (Depress latch).
CAUTION
!
Do not install this replacement Control Module until the Motor Module is proven to be in good working order.
SEE MOTOR MODULE DIAGNOSTICS
IN THE EVERGREEN EM CONTROL MODULE
INSTALLATION GUIDE
.
CONTROL MODULE INSTALLATION
CAUTION
!
Confirm the
v
oltage (VAC) and
h
orse
p
ower (HP)
rating of the new control match the control
being replaced
.
1.
Confirm the main power disconnect is open.
2.
Connect the 3-pin plug from the motor to the new control.
3.
Insert the control module into the motor shell.
4.
Use the supplied new bolts to secure the control module to
the motor.
5.
Reconnect the wires/plugs from the HVAC system to the
control module inputs.
NOTES:
1.
The first time the motor is operated, it should be mounted
in the blower section to allow the rotation sensing
sequence to w
ork properly.
2.
There is a low voltage harness supplied with this kit. It is
optional.
3.
The terminal size and location in the new Evergreen
®
EM
Control Module are identical to the Genteq
®
X13
®
Control Module and Endura
®
Pro Control Module. The original wires and/or plugs
will connect to this control in the same location they were in on the failed control.
4.
The speed tap VALUES (lo
w-Hi speed) of this control module may not exactly match the speed taps of the original control. It is
highly recommended to operate the HVAC system in all modes of operation, measure airflow and adjust speeds to match the
system performance guidelines in the OEM manual
Welcome To Our eBay Store...About Us and Our Store Policies
x
x
Airstar is quickly becoming a Leader in HVAC & Indoor Air Quality Solutions for Residential , Commercial & Industrial applications. With well over 100,000 items and shipping Worldwide, We carry only new, top of the line, brand name products and do not sell re-manufactured, refurbished, or used parts. Our products are designed and manufactured to the highest quality, safety, durability, and performance standards. Our mission from the very beginning has been to provide excellent customer service combined with extremely low prices. If you need help or have any questions don't hesitate to Contact Us.
We accept online orders 24/7. Place yours today!
Items may be shipped UPS, FedEx or USPS depending on destination. All items shipped through UPS or FedEx will need a physical address.
All addresses with a P.O. Box will be shipped via the Post Office (USPS). In most cases we will try to contact you for an alternative physical address.
UPS/FedEx cannot ship to PO Box.
Combined Shipping , Many items are available to be combined into one shipment. Each product posted on eBay indicates whether it can be combined for discounts on shipping rates. If you have any questions, please email us.
International Buyers Note: Import duties , taxes and charges are not included in the item price or shipping charges. These charges are the Buyer's Responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up the item. Please do not confuse them for additional shipping charges.
FAST SHIPPING:  We do offer Overnight / Next Day , Second Day and Other Shipping methods on most of our products.  Please contact us for Availability and Rates.
CUT OFF TIME IS 12:00PM / NOON Eastern Standard Time
Returns are available on most of our products as long as the item is new and unused and is returned with all the original packaging , box , parts and instructions.  The item must be returned exactly as it is received.  Used items for testing , troubleshooting or other are non-returnable.
All returns are subject to a 20% restock fee as well as original shipping costs.
Custom Made Items , Custom Ordered items , All Electronic / Electrical Items , Including but not limited to:  Circuit & Control Boards / Capacitors / Contactors / Motors / Relays / Etc.) are Non Returnable
C
heck out our other great
HVAC & Indoor Air Quality Solutions
!!!