30 KG SOFT BEARING BALANCING MACHINE FOR TURBO COMPRESSORS, SMALL ROTORS,EI-30

Description

High-precision Horizontal Balancing Machine
EI-30 is a high precision horizontal balancer ideal for turbochargers of high speed, as well as for other low weight rotors. The low inertia reduces vibration resistance and increase the sensitivity and accuracy of the balancing process.
Features
Balancings in 1 and 2 planes with a trial weights
Variable speed with inverter
Adjustable pulleys
3 liberty axis per pedestal
Easy adjust of the transmission system and support distance
Soft bearings suspension to minimize friction
Axial supports
Sealed sensors avoid corrosion
Slices cantilever
Easy calibration
FFT Calculations
EI-30 uses independent FFT calculation algorithms for each one of the processes to increment the speed of the graphical solution. It performs the FFT calculations with fine processing parameters. Options of the resultant spectrum: Zoom, Phase, measure, filter, RMS, Offset.
Kit Includes
(1) Balancing machine with 2 soft bearing supports for 30 kg.
(1) 127 V (
380 W AC / 0.5hp)
Motor with inverter
(1) Dual channel USB DAQ Interface
(1) Laser sensor with support
(2) 100 mV/g Accelerometers
(1) 3/8 x 66 Inch Belt
(1) DigivibeMX® M10 software CD with license
(1) Calibration device
Technical Specs
Max symmetric load
30 kg (66 lb)
Dimensions (L x W x H)
609 x 304 x 431 mm
(24 x12 x 17in)
Weight
30 kg (66 lb)
Maximum rotor diameter
533 mm (21 in)
Maximum weight per base
15 kg (33 lb)
Maximum radial displacement
6.35 mm (0.250 in)
Maximum shaft diameter
50 mm (2 in)
Min / Max distance between supports
31 mm (1.25 in)
500 mm (19.75 in)
Transmision
Flat band
Lubrication
Type-l (manual)
Precision
±0.01 mm/s
Accelerometer sensitivity
100 mV/G
ISO 2953
97 %
Residual imbalance
2 gmm / 100 kg rotor
Motor features
124 W (1/6 hp)
90VDC/1.8A
1,800 RPM
Speed drivers
Input 127/230 VAC ~ 50/60Hz
Output: 0-90/180 VDC
4-Channel Interface
3 LEMO 5-Pin connectors
(Ch 1, Ch 2, Ch 3&4/Op)
Up to 4 Monoaxial accelerometers
Active plane indicator
(LED 1-A & LED 1-B)
Simultaneous 2 plane recording
IP 67 Protection grade
4-Pin Lemo to USB cable (1m/3ft)
Frequency range: 0.5-20kHZ
Dimensions: 67x 74 x 22 mm
Weight: 100 g.
Accelerometer
Dynamic Impact Shock: 80 G Peak
(Max shock impact 5000 g)
Freq. response (+/-3dB): 0.32 - 13kHz
Sensitivity: 100 mV/g +/- 10% Transverse sensitivity: < 5%
Power supply: 2.5/5V or 24 Volt Short-circuit protection
Operation temperature: -10 - 50 °C
Protection grade: IP 67,III Impact resistance: IEC 60028-27 Standard 2 or 3 Pin MIL connector Weight: 50g Made of: Stainless steel body Includes: Magnetic Base w/neodymium
Laser Optical Sensor
Analogic output
Range: 1 - 5000 Hz
Power supply: 5V Current supply: 10mA
Operation Distance: 20 cm to 15 m
Operating temperature: -10 -50 °C
Storing temperature: -40 - 85 °C
Protection grade: IP 60, III
Impact Resistance: IEC 60028-27
Weight: 60g
Nylamid body
Check out our Online Store
Balancing Tools and Vibration Analyzers
DigivibeMX® M30
Vibration Analyzer and Balancing Tool
DigivibeMX® M20
Vibration Analyzer and Data Collector
DigivibeMX® M10
Balancing System: Single and Two Planes
Soft Bearing Suspension Systems
EI-30
New Model!
Balancing Machine up to 30 kg with Soft Bearing supports, software and sensors
SBS-300
Roller Work Supports up to 300 kg and plans for build a Balancing Machine
SBS-2000
High-performance Soft Bearing supports for Balancing Machines up to 2000 kg
SBS-1000
Balancing Machine with Soft Bearing supports up to 1000 kg . Balancing software, sensors and DAC included.
Accessories
Accesories
More from Erbessd Instruments