AC DC Clamp Current Meter Non contact Leakage Current Tester 0-1000A Peak Hold

Description

AC DC Clamp Current Meter Non contact Leakage Current Tester 0-1000A Peak Hold
Instruction:
ETCR6100 AC/DC Clamp Current Meter suitable for measuring AC, DC leakage current below 600V, range: AC/DC 0.0A~1000A, CT size: 30mmx35mm, especially suitable for places with dense flat cable (power metering system, high-speed rail system, automobile circuit maintenance, etc.). Non-contact current measurement, safe and simple operation.The instrument is small size, high accuracy, performance stable and function perfect, which is one of the necessary tools for electrician safety inspection and maintenance.
The instrument with data hold, data storage and other functions, can store 99 groups of data, the instrument connect computer by RS232 interface, stotage data can be uploaded to the computer, easy to read, analysis, save, print and so on.
Product Main Function
1. Measurement of AC/DC current, Range: 0.0A
～
1000A
2. Data Storage: 99 groups
3. Peak Hold
4. Line Voltage: below 600V
5. CT Size: 30mm x 35mm
Specification:
CT Size
30mm×35mm
Range
DC/AC 0.0A
～
1000A
Accuracy
±2%rdg±3dgt
Resolution
0.1A
Meter Size
175mm×70mm×38mm
Data Interface
RS232
Meter Weight
200g
Working Current
10mA
Function
Measurement of DC current, AC current, peak hold, on-line monitoring
Power Supply
6LR61 9V, continues working 15 hours
Test Mode
Clamp CT, Non-contact measurement
Display Mode
4digits LCD display
LCD Dimension
35mm×21.5mm
；
display area
：
32mm×15mm
Sampling Rate
About 2 times/s
Frequency
AC 45Hz ~ 400Hz
Polar Indication
Automatic identification for DC current detecting, display "-" symbol
Wire Position
The tested wire should be in the center of the clamp jaw, clamp with off-center position will increase the error for max 1.5%rdg
Shift
Automatically
Line Voltage
Line measurement below DC 600V
Software
Yes, the storage data of the meter can upload to computer by software
Data Storage
99 groups, flashing display FULL symbol indicate storage is full
Peak Hold
Peak value capture and hold function, during the testing, long press the HOLD key to display the peak value.
Data Hold
Data hold function: DH symbol display
Overflow display
Exceed measure range overflow function: OL symbol display
Auto Shut Down
5 Minutes after power on, the meter shuts down automatically without any operation to reduce battery consumption
Battery Voltage
While battery voltage decreases to around 7.2V, will display low battery voltage symbol“    ”, and remind to replace the battery
Working Temperature
-10
℃
~ 50
℃
,below 80%rh
Limit Temperature Error
-10
℃～
0
℃
and 40
℃～
50
℃
, the maximum increase in error is 2%rdg
Storage Temperature
-10
℃
~60
℃
,below 70%rh
Insulating Strength
AC2KV/rms (between the core and outside shell)
Suitable Safety Standard
IEC1010-1
、
IEC1010-2-032
、
pollution, etc 2
、
CAT
Ⅲ
(600V)
PACKING
：
Package
Outer Package
Carton
Inner Package
Cloth bag
Accessory
Meter
1 PCS
Communication Cable
1 PCS
Software CD
1 COPY
Cloth bag
1 PCS
Manual
1 PCS
Certificate
1 PCS
Warranty Card
1 PCS