FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 115VAC, 1/15HP, 5/16"

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 115VAC, 1/15HP, 5/16"
115/120 volts
EVAPORATOR FAN MOTOR
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309501S
4 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
4 STUDS, 2" ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 115/120 VAC
RPM: 1300/1600
HP: 1/15
AMPS: 0.6/0.8
ROTATION: CCWS/LE (COUNTER CLOCK WISE FACING THE BACK WHERE THE LEADS OR WIRES COME OUT.
FROM THE FRONT OF THE MOTOR WHERE THE SHAFT IS, THE ROTATION IS CLOCK WISE.
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B004-AS0171639384
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers that are 115 volts.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
5/120 volts EVAPORATOR FAN MOTOR USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. INTERLINK PART# 25309501S 4 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE 4 STUDS, 2" ON CENTER EACH STUD IS ABOUT 1/2" LONG CAN ALSO BE BELLY BAND MOUNTED. VOLTAGE: 115/120 VAC RPM: 1300/1600 HP: 1/15 AMPS: 0.6/0.8 ROTATION: CCWS/LE (COUNTER CLOCK WISE FACING THE BACK WHERE THE LEADS OR WIRES COME OUT. FROM THE FRONT OF THE MOTOR WHERE THE SHAFT IS, THE ROTATION IS CLOCK WISE. SHAFT SIZE: 5/16" SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/8" MOTOR DIAMETER: 3-3/8" MOTOR LENGTH: 3-1/2" ELECTICIAL CORD IS ABOUT 10" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING. FASCO NO. YSLB-50-4-B004-AS0171639384 TYPE: UF THERMALLY PROTECTED NO OILING REQUIRED, PERMANENTLY LUBRICATED This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers that are 115 volts. It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts. Simply match your motor to the specs in the listing to be sure it will work. If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 115VAC, 1/15HP, 5/16"
115/120 volts
EVAPORATOR FAN MOTOR
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309501S
4 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
4 STUDS, 2" ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 115/120 VAC
RPM: 1300/1600
HP: 1/15
AMPS: 0.6/0.8
ROTATION: CCWS/LE (COUNTER CLOCK WISE FACING THE BACK WHERE THE LEADS OR WIRES COME OUT.
FROM THE FRONT OF THE MOTOR WHERE THE SHAFT IS, THE ROTATION IS CLOCK WISE.
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B004-AS0171639384
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers that are 115 volts.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
115/120 volts
EVAPORATOR FAN MOTOR
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309501S
4 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
4 STUDS, 2" ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 115/120 VAC
RPM: 1300/1600
HP: 1/15
AMPS: 0.6/0.8
ROTATION: CCWS/LE (COUNTER CLOCK WISE FACING THE BACK WHERE THE LEADS OR WIRES COME OUT.
FROM THE FRONT OF THE MOTOR WHERE THE SHAFT IS, THE ROTATION IS CLOCK WISE.
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B004-AS0171639384
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers that are 115 volts.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the listing to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.