FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 208-230-1, 1/15HP

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 208-230-1, 1/15HP
EVAPORATOR FAN MOTOR
PART# 25309801S
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309801S
CAN BE MOUNTED FROM 4 LUGS ON FRONT OF MOTOR OR BELLY BAND AROUND MOTOR.
VOLTAGE: 208-230-1  SINGLE PHASE
RPM: 1400/1650, FOR 208 VOLTS: 1400, FOR 230 VOLTS: 1650
HP: 1/15
AMPS: 0.35/0.40
INCLUDES RUN CAPACITOR, 2 MFD X 370 VAC
RORATION: CCWLE (COUNTER CLOCK WISE LEAD (WIRES) END OR LOOKING AT THE BACK OF THE MOTOR.
FROM THE FRONT OF THE MOTOR THE ROTATION WOULD BE CW OR "CLOCKWISE".
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/4"
FRONT STUDS, CENTER TO CENTER: 2-3/8"
THE LENGTH OF THE MOUNTING STUDS IS: 3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION, THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B003-AS01
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
$EVAPORATOR FAN MOTOR PART# 25309801S USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. INTERLINK PART# 25309801S CAN BE MOUNTED FROM 4 LUGS ON FRONT OF MOTOR OR BELLY BAND AROUND MOTOR. VOLTAGE: 208-230-1 SINGLE PHASE RPM: 1400/1650, FOR 208 VOLTS: 1400, FOR 230 VOLTS: 1650 HP: 1/15 AMPS: 0.35/0.40 INCLUDES RUN CAPACITOR, 2 MFD X 370 VAC RORATION: CCWLE (COUNTER CLOCK WISE LEAD (WIRES) END OR LOOKING AT THE BACK OF THE MOTOR. FROM THE FRONT OF THE MOTOR THE ROTATION WOULD BE CW OR "CLOCKWISE". SHAFT SIZE: 5/16" SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/4" FRONT STUDS, CENTER TO CENTER: 2-3/8" THE LENGTH OF THE MOUNTING STUDS IS: 3/8" MOTOR DIAMETER: 3-3/8" MOTOR LENGTH: 3-1/2" ELECTICIAL CORD IS ABOUT 10" LONG AND HAS A TWO PRONG CONNECTION, THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING. FASCO NO. YSLB-50-4-B003-AS01 TYPE: UF THERMALLY PROTECTED NO OILING REQUIRED This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers. It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts. Simply match your motor to the specs in the to be sure it will work. If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 208-230-1, 1/15HP
EVAPORATOR FAN MOTOR
PART# 25309801S
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309801S
CAN BE MOUNTED FROM 4 LUGS ON FRONT OF MOTOR OR BELLY BAND AROUND MOTOR.
VOLTAGE: 208-230-1  SINGLE PHASE
RPM: 1400/1650, FOR 208 VOLTS: 1400, FOR 230 VOLTS: 1650
HP: 1/15
AMPS: 0.35/0.40
INCLUDES RUN CAPACITOR, 2 MFD X 370 VAC
RORATION: CCWLE (COUNTER CLOCK WISE LEAD (WIRES) END OR LOOKING AT THE BACK OF THE MOTOR.
FROM THE FRONT OF THE MOTOR THE ROTATION WOULD BE CW OR "CLOCKWISE".
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/4"
FRONT STUDS, CENTER TO CENTER: 2-3/8"
THE LENGTH OF THE MOUNTING STUDS IS: 3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION, THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B003-AS01
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
EVAPORATOR FAN MOTOR
PART# 25309801S
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 25309801S
CAN BE MOUNTED FROM 4 LUGS ON FRONT OF MOTOR OR BELLY BAND AROUND MOTOR.
VOLTAGE: 208-230-1  SINGLE PHASE
RPM: 1400/1650, FOR 208 VOLTS: 1400, FOR 230 VOLTS: 1650
HP: 1/15
AMPS: 0.35/0.40
INCLUDES RUN CAPACITOR, 2 MFD X 370 VAC
RORATION: CCWLE (COUNTER CLOCK WISE LEAD (WIRES) END OR LOOKING AT THE BACK OF THE MOTOR.
FROM THE FRONT OF THE MOTOR THE ROTATION WOULD BE CW OR "CLOCKWISE".
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 2-3/4"
FRONT STUDS, CENTER TO CENTER: 2-3/8"
THE LENGTH OF THE MOUNTING STUDS IS: 3/8"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 3-1/2"
ELECTICIAL CORD IS ABOUT  10" LONG AND HAS A TWO PRONG CONNECTION, THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B003-AS01
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.