Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner

Description

100% New
OEM Parts
Fast Shipping
WELCOME TO OUR EBAY STORE
climate
doctors
Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner
REFRIGERANT LEAK SEALANT
• Strongest sealant on the market
• Now made in the U.S.A.
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TXVs, cap tubes
or pistons
• New UV dye formula available for detection
of larger leaks
Now made in the U.S.A., EasySeal Direct Inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry’s leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal Direct Inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15).
Concentrated formula means less material in system.
Clear tube so you can see the sealant go in.
No need to pump down R-410A units.
Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits.
No injection hose or caulk gun needed.
One time use.
Directions
This product must be used in accordance to the following directions by HVACR professionals only.
Make sure system is running and low side and high side service ports are properly identified. If unit is a heat pump, be sure it is in cooling mode.
IT IS IMPORTANT TO FIRST: Connect EasySeal Direct Inject’s female fitting to the suction service port of system. The one way check valve will prevent back flow of refrigerant.
Make sure both valves on manifold gauge set are closed. Connect highside (red) line of manifold gauge set to the high side service port.
Barely thread the middle manifold hose (yellow) to the male fitting of the EasySeal Direct Inject. Do not thread to the point of depressing the Schrader core.
Briefly crack open high side manifold valve to purge air out of the yellow hose, close high side manifold valve, then quickly tighten yellow hose fitting to the injector.
Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Direct Inject tube.
With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Direct Inject to equalize to suction pressure.
Disconnect EasySeal Direct Inject from suction service port and from manifold gauge set. Discard or recycle empty injector.
NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Direct Inject to service port and inject refrigerant through injector into system while charging.
WARNING:
Wear safety glasses. Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite
Frequently Asked Questions:
Do I need to pump down the system in order to get EasySeal Direct Inject into the system?
No, unlike competitive sealants, you do not need to pump down the system regardless of what type of refrigerant is being used. Just connect EasySeal Direct Inject to the low side with the system running and inject into the system as instructed.
Can I inject EasySeal Direct Inject while I am charging the system with refrigerant?
Yes, you can use the refrigerant being added to push the sealant into the low side of the system.
Is this product the same formula as pressurized can?
It is the same EasySeal sealant, but at a much higher concentration. The EasySeal Direct Inject is designed to treat 1.5-5 ton systems just like the A/C EasySeal pressurized can (4050-06). The EasySeal-SS Direct Inject is designed to treat systems under 1.5 tons just like the A/C EasySeal-SS pressurized can (4050-01).
Will EasySeal Direct Inject work on aluminum coils and microchannel coils?
Yes, EasySeal Direct Inject is perfect for microchannel coils, all aluminum coils, mini splits, package units, and all other coil types.
Does EasySeal Direct Inject travel with the refrigerant or the oil?
EasySeal Direct Inject travels with the system’s refrigerant to find leaks fast.
How small of a system can I use EasySeal-SS Direct Inject in?
We recommend not using it in systems that hold less than 10 oz. of refrigerant.
Can I use EasySeal Direct Inject in a system using a cap tube?
Yes, you can use in a system with a cap tube, TEV, or piston style metering device.
Does the female fitting on the EasySeal Direct Inject have a one-way check valve?
Yes, it is designed to only allow EasySeal to flow into the low side of the system.
Why is there a small bubble in the EasySeal Direct Inject tube?
This small bubble is the dry dissolved gas in the EasySeal formula that is injected during the filling process. It insures a consistent fill rate and can vary in size slightly.
Is EasySeal Direct Inject safe to use with my manifold?
Yes, it is OEM approved not to damage analog or digital manifolds.
Can I mix multiple internal treatments in the same system with EasySeal Direct Inject?
You could mix other Nu-Calgon products like A/C Re~New or Rx-Acid Scavenger in the same system, as they have been tested compatible. However, we have not tested all competitive products and would not recommend adding others to the system.
Can I refill the EasySeal Direct Inject tube instead of throwing it away after used?
No, they are designed to be a one-time use injector but, the nylon, brass and aluminum can be recycled rather than thrown away.
What size refrigerant leak will EasySeal Direct Inject repair?
It will seal the smallest microleaks as well as much larger leaks that can be detected with gas leak detectors. In most cases, as long as the system’s entire charge is not lost in a week or less, EasySeal Direct Inject will fix the leak.
Does EasySeal Direct Inject contain polymers?
No, EasySeal is “polymer free” while in the tube and circulating through the system.
How do I find leaks when using the EasySeal Direct Inject-UV?
If larger leaks continue, use a UV light and glasses to scan the system for a bright yellow-green glow to show where the system is leaking.
Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information.
The SDS is available on the Nu-Calgon website.
Payment
Shipping
Returns
Refunds
Contact Us
About Us
Payment
Shipping
Returns
Refunds
Contact Us
About Us
We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards.
For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours.
**Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses.
We combine shipping when possible.
All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday.
Tracking information is sent to you automatically at the time of shipment and is always available if needed.
All orders are inspected prior to shipment and are insured against loss or damage in transit.
All international customers are responsible for and duties and broker fees.
Standard US shipping rates do not include Alaska and Hawaii.
Please contact us for a shipping quote to these destinations.
If there are any questions, please ask before you make a purchase and/or bid.
Return Eligibility
You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging.
Returns will not be accepted on items that are:
Opened or used
Items cannot be returned once installed
Missing their serial number or UPC
Non-Returnable Items
Returned more than 30 days after delivery
Returned without notification
Tools and Meters are exchangeable within 3 days of receipt.
Non-Returnable Items Policy
Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges:
Replacement Parts
Refrigerant
Compressors
Equipment
Electrical Parts/Components
Heating Parts/Components
A/C Parts
If you have a non-returnable item that arrived damaged or defective please contact us immediately.
Restocking Fee
All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in.
Return Instructions
To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you'll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions).
Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately.
We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges.
If you return an item that was opened or shows signs of wear, that item is not eligible for a refund.
Products must be received at our returns processing facility before 30 days from the date of sale.
You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details.
Error Corrections & Term Amendments
Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time.
Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions!
Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST.
Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We're family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We're big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs!
100% New
OEM Parts
Fast Shipping
Click here to see description
WELCOME TO OUR EBAY STORE
climate
doctors
${TITLE}
${DESCRIPTION}
${SPECS}
Payment
We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards.
For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours.
**Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses.
Shipping
We combine shipping when possible.
All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday.
Tracking information is sent to you automatically at the time of shipment and is always available if needed.
All orders are inspected prior to shipment and are insured against loss or damage in transit.
All international customers are responsible for and duties and broker fees.
Standard US shipping rates do not include Alaska and Hawaii.
Please contact us for a shipping quote to these destinations.
If there are any questions, please ask before you make a purchase and/or bid.
Returns
Return Eligibility
You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging.
Returns will not be accepted on items that are:
Opened or used
Items cannot be returned once installed
Missing their serial number or UPC
Non-Returnable Items
Returned more than 30 days after delivery
Returned without notification
Tools and Meters are exchangeable within 3 days of receipt.
Non-Returnable Items Policy
Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges:
Replacement Parts
Refrigerant
Compressors
Equipment
Electrical Parts/Components
Heating Parts/Components
A/C Parts
If you have a non-returnable item that arrived damaged or defective please contact us immediately.
Restocking Fee
All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in.
Return Instructions
To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you'll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions).
Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately.
Refunds
We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges.
If you return an item that was opened or shows signs of wear, that item is not eligible for a refund.
Products must be received at our returns processing facility before 30 days from the date of sale.
You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details.
Error Corrections & Term Amendments
Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time.
Contact Us
Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions!
Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST.
About Us
Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We're family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We're big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs!
100% New
OEM Parts
Fast Shipping